“HONMAMON” Professional Planes (Hira-Kanna) "TETSUNO-KOKORO" white oak base Aogami super steel
Sale price
Price
US$186.00
Regular price
Unit price
per
★★★ Three HONMAMON Stars (link)
What makes these planes different
Japanese planes cut on the pull stroke, and it can take a while to adapt to this, though when you do, you’ll discover it gives you both more power and more control.
The laminated steel and iron blade is stout compared to western planes. There a many different planes for all types of work.
A Japanese plane consists of 4 main elements.
Body - Wood base, usually white oak or red oak.
Blade – Laminated from two pieces of steel, the very hard edge is so brittle, so used thick and very soft iron to supported.
Adjustable Chip breaker – a second blade that breaks the wood fibers after they’re cut, reducing tear out.
Holding pin – Holds the blade and chip breaker in place.
How to set up Japanese plane:
1. We are preferring you use wood hammer tap the top of body base to move the blade.
2. Tap top side of blade to adjust the blade fill into body base.
3. Adjust the blade of left side and right side to set horizontal of blade.
Made by Tsunesaburo
Mr. Tsunemitsu Uozumi build up Tsunesaburo Plane Works Co., Ltd. In 1947. Plane blade maker studied under from his grandfather since he was a child and has mastered the secrets of process for making plane for 28years. Now, a third generation of the Tsunesaburo family, the second-generation owner Mr. Asao Uozumi according to the purpose of use utilizing both the traditional method and modern equipment. And keeping the new skill continues to third-generation owner Mr. Toru Uozumi.
Tsunesaburo is one of the most famous woodworking molding plane brands in Japan. The blade part is made of Aogami Super Steel which is the highest glade Carbon steel in Japan.
- Used white oak wood of body base
- Blade Material is used Aogami Super steel
- Made in Japan
- A brand new, Price is including a Kanna plane
- Handmade Japanese plane
- Support visit factory services
For maintenance:
Natural sharpening stones
Japanese planes with the super sharp blade, we are preferring you use natural sharpening stones to grind your planes of blade.
Use before you need insert the chip breaker.
The chip breaker breaks wood fibers so that they do not crack before they are cut loose from the plane iron. It is important that the chip breaker fits exactly on the plane iron, otherwise wood chips can get stuck in the opening and make planning harder and less accurate.
If there is not enough space in the iron bed of the plane for the chip breaker, the wood can be adjusted in the same way as with the plane iron. The chip breaker is then positioned so that it gets stuck under the metal pin that is inserted through the bed. It is important, of course, that the plane iron that has already been placed does not slip.
The Japanese plane differs from the Western plane in one important respect: it is used with a pulling motion, so pull it towards you when planning. To do this, place your "good" hand in front of the iron bed of the plane, and the other hand on the back to be able to steer the plane. If the surface to be planed is very long, it may be necessary to go along with the instrument.
Original blade support
We are welcome everyone contacts us to help you make your original planes of blade.
Size:
42mm
Plane blade width 42mm, cutting width 39mm, Total length abt 73mm /
Base size: Total length 214mm, Width 57mm, Height 27mm
Item no. 1113594
48mm
Plane blade width 48mm, cutting width 45mm, Total length abt 76mm /
Base size: Total length 213mm, Width 65mm, Height 27mm
Item no. 1113593
55mm
Plane blade width 55mm, Cutting width 49mm, Total length abt 83mm /
Base size: Total length 244mm, Width 68mm, Height 29mm
Item no. 1113592
70mm
Plane blade width 70mm
Item no. 4580149747319
Import duties; taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.